Note: A vertical line sometimes appears at the splice point when MM fibers, or dissimilar fibers (different diameters) are spliced. This does not affect splice quality, such as splice loss or tensile strength.
Day: April 6, 2015
IFS-10 Fusion Splicer Trouble Shooting
IFS-10 Fusion Splicer Troubleshooting Power supply • Power does not turn off when pressing ⊙: Press and hold the key until the LED color changes from green to red. • Few splices can be made with a fully charged battery pack: •If the power saving function is not enabled, battery power degrades faster. Refer to […]
How to splice fiber by Inno IFS-10 Fusion Splicer
How to splice fiber optic cable This section is a detailed introduction about how to splice two fibers together to become a single core fiber. the instruction divided into several section, please refer the list as follow: 1. Preparing the splicer 2. Preparing the fiber 3. How to make a splice 4. How to check […]
Loose Tube Vs. Ribbon Fiber Cabling
Making the Right Fiber Cable Choice can Improve Overall Performance of Distribution Cables in the PON In the distribution portion of the passive optical network (PON) for fiber-tothe-premise (FTTP) architectures, the choice of fiber cabling – ribbon vs. loose tube – can directly impact ease of installation and future performance. As is usually the case […]
Wavelength Division Multiplexing (WDM)
WDM Introduction WDM dramatically expands the total capacity of an optical network by enabling a large number of independent wavelength channels to travel within the same network. This core technology allows network capacity to be gradually and cost effectively increased while flexibly allowing multiple generations of transmission technologies to be supported on the same network […]
M2M Evolution Week in Review: IBM, Harris Poll, Konekt
It’s a short week here at M2M Evolution, but that doesn’t mean it hasn’t been exciting. We had lead stories on some amazing battery technology, a sweet IoT DIY Kickstarter campaign, bionic ants and an update on IBM’s $3 billion bet on M2M, to name just a few. Let’s start with the big dollar figure. […]