Share

The following is a comparison table among Fujikura FSM-70S+/FSM-80S+, Sumitomo Type-72C, Fitel S179A and INNO View 7 Fusion Splicers.

Manufacturer FUJIKURA SUMITOMO FITELINNO
Model No.FSM-70S+TYPE-72CS179AView 7
Splicing MethodCore AlignmentCore AlignmentCore AlignmentCore Alignment
Applicable FibersSM(G. 652/657)
MM(G.651)
DS(G. 653)
NZDS(G. 655)
SM(G. 652/657)
MM(G.651)
DS(G. 653)
NZDS(G. 655) BIF
SM (ITU-T G.652, G.657A1 and G.657A2), MM (ITU-T G.651), DSF (ITU-T G.653), Cut-off Shifted Fiber (ITU-T G.654, Large Area type), NZD (ITU-T G.655), BIF/UBIF (Bend Insensitive Fiber ITU-T G.657B3)SM(G. 652/657)
MM(G.651)
DS(G. 653) NZDS(G. 655)
Average LossSM : 0.02dB
MM : 0.01dB
DS : 0.04dB
NZ : 0.04dB
SM : 0.02dB
MM : 0.01dB
DS : 0.04dB
NZ : 0.04dB
SM : 0.02dB
MM : 0.01dB
DS : 0.04dB
NZ : 0.04dB
SM : 0.02dB
MM : 0.01dB
DS : 0.04dB
NZ : 0.04dB
Splicing Time6sec ULTRA FAST
7sec SM FAST, 10sec SM AUTO
5sec(SM G652 Quick Mode), 7sec(SM G652 Std. Mode), 7sec(Auto Mode)6 seconds (Semi-auto mode)7 sec : Quick Mode
8 sec : Auto mode
Heating Time13sec FP-03,coating dia.250μm 14sec FP-03,coating dia.900μm 9sec Slim 60mm ,coating dia.250μm9sec (FPS-61-2.6 sleeve, S60mm 0.25 Quick Mode )9 (60mm, Tyco SMOUV1120-01, coating diameter 250-900μm, Power mode)
13 (60mm, FITEL S921, coating diameter 250μm, Power mode) 15 (60mm, FITEL S921, coating diameter 900μm, Power mode)
13 sec
Electrode life5000 arc6,000 arc discharges/3500 arc
Battery
Capacity
Typical 200 Cycles
(4,000 mAh)
Approx. 300 (BU-16)80 Cycles with single
battery
200 Cycles with two
batteries
Typical 355 Cycles
(9,800 mAh)
Return Loss≥60dB/≥70dB≥60dB
Fiber Holder
Type
Universal clamp
(250um, 900um,
loose buffer fiber)
200 images / 10,000 splice data (internal memory only) 50,200/20,000 (with 8GB SD card)Last 100 images to be automatically captured + up to 100 images to be stored permanentlyWith Universal Holder
(250um, 900um, 3mm, indoor cable)
Splicing
Programs
Max 100 modesMax. 300, 74 are pre-optimsed, 226 editable by userMax. 300Preset 35 modes
Max 128 modes
Heating
Programs
30 modesMax. 100, 27 are pre-optimsed, 73 editable by userMax. 100Max 32 modes
Tension1.96 ~ 2.25N1.96 ~ 2.09N1.96N1.96 ~ 2.25N
Cleaved
Length
With Sheath Clamp 5 ~ 16mm5 ~ 16mm, 10mm5 ~ 16mm8 ~ 16mm
Display4.73” Color LCD5.0″ touch screen color LCD display4.3” wide color LCD monitor with touch screen5” Touch Screen Color
LCD
Operating Interface//GUIGUI
Wireless connectivityWireless technical standard : Bluetooth®4.1*3
OS : Andoroid 5.0 or above, ios 8.0 or above (iphone6 above)
Wireless LAN connectivityCommunication between splicer and smartphone
Results
Storage
Splice Data : 2000 Image Data : 100200 images / 10,000 splice data (internal memory only) 50,200/20,000 (with 8GB SD card)Image Data :100 + 24 to Splice Data : 2000
be stored permanently
Splice Data : 2000
Communication InterfaceUSB 2.0 (Mini-B type) connector for PC communication.
6-pin Mini-DIN connector for RS02 or RS03 power supply.
USB2.0(mini-B type)
SD/SDHC Memory Card
USB ver. 2.0 mini B x 1 port, Standard A x 1 portUSB 2.0
MINI USB
HDMI
Dimensions146W X 159L X150H(mm)
Excluding Rubber Foot
128(W) x 154(D) x 130(H) mm (without anti-shock rubber)139W x 209D x 114H mm (not including shock absorber)133W x 155L x 160H(mm)
(excluding rubber
bumper)
Weight2.5kg with ADC-18
2.7kg with BTR-09
1.9kg (without Battery) / 2.2kg (with Battery BU-16)1.7 kg (without battery), 2.0 kg (with battery)2.17KG (without battery)
2.80KG (with battery)
Power AC100 to 240 AC100 to 240 AC100 to 240 AC100 to 240 AC
DC10 to 15V with ADC-18
14.8V with BTR-09
10 to 15V11 to 24V9 to 14 V
Operating
Condition
0 to 5000m above,
0 to 95%RH and
-10 to 50 °C and
up to 15m/s
wind velocity,
respectively
Altitude : 0 ~ 6,000m, Temperature : -10 ~ +50°C, Humidity : 0 ~ 95% (non-condensing), Wind velocity : up to 15m/sec0 to 5000m above,
0 to 95%RH and
-10 to 50 °C and
up to 15m/s
wind velocity,
respectively
0 to 5000m above,
0 to 95%RH and
-40 to 80 °C and
up to 15m/s
wind velocity, respectively

Price to high for those fusion Splicer?

Buy an economic version now:

 

Share

Leave a comment